A History of Architectural Acoustics: Amplifying and Silencing Sounds
AT LA VALLTORTA GORGE IN VALENCIA, SPAIN, THERE ARE FIGURES OF HUMANS AND ANIMALS THAT WERE PAINTED ONTO THE ROCK FACE BY OUR PREHISTORIC ANCESTORS MANY THOUSANDS OF YEARS AGO. IN 2012, TWO ARCHEOLOGISTS PUBLISHED A PAPER REVEALING THE RESULTS OF A SERIES OF SOUND EXPERIMENTS THEY HAD CONDUCTED IN THE GORGE.
Main entrance of the Citterio showroom – ph. Alessandro Saletta – DSL Studio
The threads of architectural acoustics run right through from rock shelters to the high-tech acoustic panels developed by Citterio, an Italian manufacturer that is a part of the Molteni Group and which creates modular partitions specifically designed to absorb sound and create ideal environments for creative work.
Yet while Citterio’s contemporary technology builds on a long history of engineering sound via architecture and design, it also runs counter to much of the historical treatment of sound within space – a history that has often emphasised amplification, rather than absorption, of sound. The La Valltorta gorge is one example of this phenomenon, and so too is the Epidaurus theatre in Greece – a space that has always shouted about being an acoustically optimised workplace. In the 4th century BCE, its architects created a curving, tiered theatre where a performer could project their voice to 14,000 spectators at a time. Legend had it that any audience member could hear a match struck on stage from any seat in the theatre; although when students from Eindhoven University of Technology used microphones to investigate, they found that, realistically, you’d have to be sitting fairly close to the stage. Archaeoacoustics strikes again.
The result was Sabine’s equation, a formula used to calculate how long it takes for a sound to die away in a room, or the reverberation time. Sabine went down in history as the founder of architectural acoustics, with the Sabin – a unit of sound absorption – still bearing his name. But Sabine’s work was more than purely theoretical – he actively helped architects to design spaces more sensitively.
When the designers of St Thomas Church in New York ran into an acoustical issue, they called on him for input. While they wanted the grandeur of a neo-gothic cathedral, the reverb that would be created by sound bouncing off its stone – ideal for choirs and a mass delivered in Latin – would jumble the words of the Protestant sermons that were to be delivered in the space. As such, Sabine collaborated with Rafael Guastavino, a Spanish building engineer, to create the Rumford tile. By mixing and firing peat with clay, the peat burned away to create a porous clay tile that could absorb sound. Now architecture could be both sweeping and grand – but still suited to communication.
By the 20th century, these ideas were being pushed even further, as the everyday world became significantly louder. Cars replaced horse-drawn carriages, aeroplanes began to roar across the sky, and mass transit systems shuttled people on their noisy way to work. And at work, silence was not to be found either. In 1906, 13 years before Sabine died, the architect Frank Lloyd Wright created the first open-plan office in Buffalo, New York. The Larkin Administration Building was designed like a factory floor, with office furniture made of metal. Magnesite, a mineral with acoustic properties, was shipped over from Greece and used everywhere in the building, from the floors to the desktops, to absorb the office sounds. By the 1940s, the fortunes of the Larkin Company had declined, and its flagship office was later demolished – but in Europe its idea for the open-plan office had taken off, with non-hierarchical seating arrangements appealing to postwar ideals of social democracy. But while the abolishment of the boss’s corner office may have been one thing, the reverberating sounds of scores of people talking and typing with no walls to impede the noise was quite another.
C-SS acoustic box with sound-absorbing panels – ph. Daniela Trost
View of a private office with Basic partition system. Next, C-SS acoustic box - ph. Alessandro Saletta – DSL Studio
This has been Citterio’s concern for decades, resulting in the creation of the Citterio Sound System, or C-SS. Composed of partition walls formed of high-tech polyester fabric on wood particle backing with aluminium frames, C-SS can be manipulated to create pockets of quiet and privacy within clattering and buzzing open-plan offices. Its most popular application is for meeting rooms, where it is important that attendees can hear each other without distraction, while their conversations remain private. Yet C-SS has a multitude of uses, from creating break rooms for moments of calm in workers’ days, to reading rooms for quiet study.
Acoustic design has come a long way through time and place, from the ancient amphitheatres designed to amplify sound through reverberation, to Sabine’s theatre cushions applied to dampen unwanted sounds in an Ivy League lecture hall. C-SS is part of that history, representing the research that has resulted in office products that can create pockets of sound control that at once embody thousands of years of technological advancement, yet recall the rocky overhangs that sheltered the prehistoric artists of La Valltorta gorge as they went about their creative work in perfect resonance.